► MODEL(Registration Capacity) • WF-2005-F30(30 fingerprints+30 password numbers) • WF-2005-F100(99 fingerprints+99 password numbers) • WF-2005-F260(254 fingerprints+100 password numbers) ► Main Features: •Patented OneTouchTM auto fingerprint verification. •LED display • Three independent unlocking:Fingerprint, Code or Mechanical Key. • Universal hand mechanism for Left or Right hand door easy installation. •Administrator controlls easily adding or deleting other individual users. • Lock/Unlock from Inside and Outside mechanically with Patented Secure Deadbolt. • Back-lit keypads for easy access in the dark • Low battery alert • Passage mode: Convenient passage mode enables door open all the time • High quality latch with standard 5-1/2 spacing between the latch and deadbolt •Optional water-protectionset for outdoors • Battery saving design which doubles the battery lifetime of other similar ►SPECIFICATIONS Fingerprint Sensor 500 DPI optical sensor Verification Time <1 sec Verification Type 1 to N FAR (False Accept Rate) < 0.0001% FRR (False Reject Rate) < 0.1% Password length 6 - 14 digits Power Supply 4* 1.5V AA alkaline batteries Battery Life Span 1 -2 years (about continuously operate 20,000 times) Emergency Key Override 8pin key cylinder Operating Humidity 10%-80% Operating Temperature For fingerprint entry: -10℃～+65℃ (-14℉～+149℉) For password entry: - 40℃～+65℃ (-104℉～+149℉) Patented One TouchTM auto verification Just put the finger on the sensor, the lock will verify fingerprint automatically. It only needs 1.7 soconds from placing finger on the window panel to unlocking, which is quickest verifying speed - about 3 times as fast as normal fingerprint locks. Side ViewBack View To find more fingerprint locks COMPARISON TABLE: WF-2005 Series Products in the same category 1 CPU speed: 440MIPS; Memory size: 8M Byte RAM and 2M FLASH ROM CPU speed: only 100-200MPIS (normally); Memory size: only 256K RAM and 64K FLASH ROM (normally) 2 Because of high-speed running of CPU and large memory size, the mature and stable high performance algorithm for verifying a fingerprint can be adopted to realize the quick and accurate verifying. Because of the restriction of the speed of CPU and small memory capacity, only the simplified algorithm can be adopted, which results in verifying a fingerprint slowly and with the lower reliability and stability. 3 High-speed 1:n verifying templates: when n=250, verifying time<1s and when n=100, verifying time< 0.7s, thus the verifying speed is greatly higher than the similar products. 1:1 verifying templates: it would even need 4-5s to complete the verification of a fingerprint. 4 Patent automatic finger sensing technique without pressing any buttons to wake up, resulting in the easy operation. Uneasy operation: It needs input a password by buttons to wake up the lock. 5 Any appointed fingerprint/password relating to the ID can be deleted via the display screen. Without a display screen, a user can only delete all fingerprints. 6 Hierarchy management: Only the administrator can set or delete a fingerprint and a password, once a user being authorized, it is possible for him to input many fingerprints, so it is very easy to use. User can only set a fingerprint through a preset password and can only input one fingerprint once, thus it is inconvenient to operate. 7 With the authorization of the administrator, every user can set its own password. Users can only set one shared password to unlock, which is very long and with only four numbers (0 to 3), thus it is not easy to remember. 8 Passwords, which can be set freely within the length of 6-14 digits, and a unique keypad (4 buttons) containing numbers (0-9) in all, make it much easier to remember and use password. Fixed length of the password with only four numbers (0-3) makes it not easy to remember and use. 9 Patent mechanical control system (unlocking without distinction of turning to left from turning to right) provides easier installation for users and especially meets the needs of DIY. Unlocking with distinction of turning to left from turning to right, which makes inconvenient to stock and install the locks. 10 Simple operation: With the reference to the manual, users can master the entire operation within 5 minutes. Complicated operation: It needs the professional guidance. 11 A laser photo-etching keypad with blue backlight; a bigger size lock body (1.5 times larger than the similar products’), an elegant and luxurious appearance. A keypad with no backlight, a relatively small size of the lock body.

TalenCa Fingerprint Stand-alone Access Controller AC-2006-S Fingerprint Stand-alone Access Controller is one of our newly developed biometric products. This keyless entry system incorporates our patented fingerprint technologies and fine manufacturing craftsmanship to offer customers a high end device for home and small office security applications. The system has everything required for most residentialdoor installations, including a fingerprint reader, a door controller, and a power supply. The fingerprint reader is designed for outdoor mounting and provides users two simple and easy ways to opendoors by either a touch of a fingerprint or a password. Ø OneTouchTMauto fingerprint verification. Ø Administrator controlled with easy adding or deleting other users. Ø LED display screen and back-lit keypads for easy access in the dark. Ø Sleek & Durable Design. Ø User friendly program for easy Installation and Operation. Ø Water-protection and sunlight resistant for outdoor use. Ø Can be connected to electric strike, magnetic lock etc. SPECIFICATIONS: Fingerprint Sensor 500 DPI optical sensor Verification Time <1 sec Verification Type 1 to N Fingerprint capacity Up to99 fingerprint templates + 99 passwords FAR (False Acceptance Rate) < 0.0001% FRR (False Rejection Rate) < 0.1% Password Length 6 - 14 digits Power Supply 120V/60Hz 5WAC Power (Max output current 12V/1A DC) Operating Temperature For fingerprint entry: -10℃～+65℃ (-14℉～+149℉) For password entry: - 40℃～+65℃ (-104℉～+149℉) Fingerprint Reader Dimension 6”X2-3/16”X1-11/16” Operating Humidity 10% ～80% *Test results may vary due to different batteries. PACKAGING: Description G.W. (KGS/PC) Inner Box Total G.W. (KGS/CTN) Carton (10SETS/CTN) Fingerprint Access Controller 1.50KG 21.5mm(L)X 21.0mm(W)X 7.0mm(H) 15.75KG 425mm(L) X 281mm(W) X 396mm(H)

Specifications: Fingerprint Sensor 500 DPI Optical Sensor Registration Capacity 30 fingerprints +30 passwords Password Length 10 ~14 digits Info Display 3 LEDs Verification Time <1 second False Rejection Rate (FRR) < 0.1% False Acceptance Rate (FAR) < 0.0001% Standby Current <50µA Operating Humidity 10% ～ 80% Operating Temperature For Fingerprint Entry: +14 F ～ +149 F For Password Entry : -40 F ～ +149 F Features: ◆High Security: Patent pending heavy duty Electronic Swingbolt lock combined with the controller ◆ Locking: Auto locking upon closure ◆ Lock Override: Hidden key override ◆ Unlocking: A fingerprint touch or password ◆ Materials: Carbon Steel ◆ Power Supply: One standard 9V AA alkaline batteries ◆ Color: Black or customized colors. ◆ Dimensions: 14(W) *10-1/4(H) *9-7/8(D) 　 355mm(W) *260mm(H) *250mm(D) ◆ Weight: Net: 23.4 lbs. (14.0 Kgs) Gross: 24.3 lbs. (14.5 Kgs)

Down LoadThe PDF Flyer Biometric Series Controllers are our newly developed biometric series products. Incorporated with our patented fingerprint technologies, the Biometric Controller offers customers a high end system for safes applications. It features our unique Self-Learning software function, user-friendly LCD info display, programmable Time Delay / Time Window, Security Level 2 fingerprint plus password unlock and 30 fingerprints user capacity. FPC-0601A series Biometric Entry Pad is designed for convenient sliding mounting with three simple and easy ways unlocking by a finger touch, a password or a fingerprint plus a password. It employs a user-friendly LCD info display for easy lock operations. Combined with our UL approved and patented heavy duty EL-0601 Electronic Swingbolt, it provides a complete control system to safeguard your safes. Polished Brass Brushed Chrome Features: ◆ UL approved BSL-0601A series ◆ Patented OneTouchTM auto fingerprint verification ◆ Unique Self-Learning function ensuring easy operation with much reduced FRR ◆ Battery saving design with one 9V battery operation and low battery alert ◆ UL approved and patented heavy duty EL-0601 Electronic Actuator ◆ Administrator control with individual user enrollment and deletion ◆ Programmable 0 ~ 99 minutes Time Delay and 0 ~ 20 minutes Time Window ◆ Wrong password entry lock out penalty ◆ User-friendly LCD info display for easy lock operations ◆ Optional audit trail reporting up to 1,023 activities on LCD info display ◆ Optional time lock allowing users greater flexibilities on control ◆ Optional dual mode providing accountibility by requiring two separate user entries Electronic Actuator Specifications： Registration Capacity 30 fingerprints + 30 passwords Password Length 10 digits Verification Time < 1 second False Rejection Rate (FRR) < 0.1% False Acceptance Rate (FAR) < 0.0001% Standby Current <50uA Power Supply One 9V Alkaline battery (recommend DuracellTM) Battery Life Span About 1 year Battery Low Voltage 5.4±0.2V Operating Temperature For fingerprint entry: +14°F ~ +149°F / -10°C ~ +65°C For password entry: -40°F ~ +149°F / -40°C ~ +65°C Operating Humidity (Max.) 90% Time Delay 0 ~ 99 minutes Time Window 0 ~ 20 minutes

Electronic Combination Controller (ECSL-0601A) Electronic Combination Controller Series are newly developed electronic series products. Combined with our UL approved and patented heavy duty EL-0601 Electronic Actuator, the Controller provides a complete lock system to safeguard your safes. Digital Entry Pad is designed for convenient sliding mounting in an easy way of unlocking by passwords. Polished Brass Brushed chorme -------------------------------------------------------------------------------- FEATURES: ECSL-0601A Basic Series ◆ UL listed assurance ◆ Manager plus two user codes ◆ Wrong entries penalty ◆ Audio signals ◆ Standby status ◆ One 9V alkaline battery power supply ◆ Low battery alert Options: ◆ One super code lock reset ◆ Single and Dual User modes ◆ Programmable Time Delay and Time Window Electronic Actuator Specifications： Power Supply One 9V Alkaline battery (Recommend DuracellTM) Power Supply Range DC 4.5V ~ 12V Password Length 6 digits Standby Current <15uA Active Current <20mA Battery Low Voltage 5.2±0.2V Operating Humidity (Max.) 90% Time Delay 0 ~ 44 minutes (ECSL-0601A) Time Window 0 ~ 20 minutes (ECSL-0601A)

TalenCa 8800XG Wireless Online Smart Card Lock System Configurations Item Description Model Remark 1 Wireless RF Card Lock TalenCa 8800XG Different Appearance Available 2 Wireless Access Point (WAP) WAP08/WAP08P Connecting All Wireless Devices to Ethernet LAN 3 Wireless Network Bridge (WNB) WNB08 Connecting All Wireless Door Locks in Different areas to Ethernet 4 Wireless USB Adaptor WA08U Optional, Used for System online Maintenance 5 Others Server Software, Interlinked Lock Management Software, Card Issuer, Smart Card, Ethernet Switch TalenCa8800XG Wireless RF Card Lock (Matt Silver With Polished Rim) Wireless Access Point & Wireless Net BridgeWireless USB Adaptor Wirless Station Management System Working Principles： The communication system contains two parts: wireless network and wired network. WRFLock communicates with WNB and WAP through wireless signals. Host computer communicates with WAP through wired Ethernet LAN. Normally one wireless network is Constituted on each floor, where there are many WRFLocks, one WAP and some WNBs. Wireless network is created by WAP. WNB and WRFLocks connected with WAP nearby automatically. System Topologic Diagram: Features： 1) No cables needed when installing door lock. It works with 4 AA alkaline batteries. 2) Up to 20m (65’) effective communication distance between WAP and WRFLock. 3) It adopts MIFARE contactless smart card of PHILIPS Company in Holland. It has advanced high performance and dependability. 4) Monitoring and recording all operations by host computer in real-time 5) Detecting wireless signal intensity by host computer, So that the system installation and commissioning is simple. 6) Low voltage detecting and alerting by host computer, So that the easy system maintenance is easy. 7) FLASH storage technology. Parameters info, card info, and records of all door locks can be saved in FLASH. Even when power supply is cut off, no data will be lost. 8) Multiple door locks can be open by only one card. Multiple cards (Maximum 64 pcs) can open one door lock. 9) Opening Interface. Thus, you can realize the connection with all kinds of hotel management systems and realize the multi-purpose smart card management. Specification: Power Supply DC6V,4 AA Alkaline Batteries Door-lock-opening Method Smart Card, or Override Mechanical Key Standby Current <50µA Life Span ≥100,000 Cycles Distance of Reading Card ≥10mm Supported RF Card Type Philips Mifare one S50 Smart card Operating Frequency of Reading Card 13.56MHZ Communications Speed of Reading Card 106KBPS Wireless Frequency Band 2.4GHZ(Open band, FCC approved with no need to apply for a licenses for the band) Wireless Communications Speed 200KBPS (Max.) Distance of accessible communications 20m

► Fingerprint Capacity: 30 fingerprints + 30 passwords ► Main Features • Three independent unlocking:Fingerprint, Code or Mechanical Key. •Universal hand mechanism for easy Left or Right hand door installation • LED display •Administrator controlls easily adding or deleting other individual users. • Lock/Unlock from Inside and Outside mechanically with Patented Secure Deadbolt. • Back-lit keypads for easy access in the dark • Low battery alert • Passage mode: Convenient passage mode enables door open all the time • High quality latch with standard 5-1/2 spacing between the latch and deadbolt •Optional water-protectionset for outdoors • Battery saving design which doubles the battery lifetime of other similar ►SPECIFICATIONS To find more fingerprint lock Fingerprint Sensor 500 DPI optical sensor Verification Time <1 sec Verification Type 1 to N FAR (False Accept Rate) < 0.0001% FRR (False Reject Rate) < 0.1% Password length 6 - 14 digits Power Supply 4* 1.5V AA alkaline batteries Battery Life Span 1 -2 years (about continuously operate 20,000 times) Emergency Key Override 8pin key cylinder Operating Humidity 10%-80% Operating Temperature For fingerprint entry: -10℃～+65℃ (-14℉～+149℉) For password entry: - 40℃～+65℃ (-104℉～+149℉) Patented One TouchTM auto verification Just put the finger on the sensor, the lock will verify fingerprint automatically. It only needs 1.7 soconds from placing finger on the window panel to unlocking, which is quickest verifying speed - about 3 times as fast as normal fingerprint locks. Side ViewBack View

Electronic Combination Controller (ECSL-0601A-L Series) ECSL-0601A-L series Electronic Combination Controller is our new generation product with the main goal of simplicity. With the application of 128 x 64 lattices HD LCD, it features an easy to use operate menu. This includes a correction prompt for inaccurate operations making it straightforward and simple to maintain. Users can follow the prompts and operate the product without training or reading a manual. ECSL-0601A-L series includes basic models for residential or commercial use and world-class wireless record transferring and wireless networking models to meet the needs of high-end users. The company’s strict production and management process ensures excellent quality products. The designed life span is up to 500,000 working cycles. The unique procedure of conducting a two-thousand-time heavy duty aging test on each unit is the company’s promise to insure product reliability. FPC-0601A-W Entry pad EL-0601 Electronic Actuator Wireless Access Point &Wireless USB Adaptor Wirless Station Management System Features Chart: *Includes only codes that can be used to open the lock. codes used only for recovery are not included in this number. **Three package kits: Kits1: Wireless USB Adaptor 2.4GHz RF Wireless adaptor + software (USB RF kit) Kits2: TCP/IP 2.4GHz RF Wireless AP + stand-alone software (one workstation + intranet) Kits3: TCP/IP 2.4GHz RF Wireless AP + multi-user server/client software (internet) Specifications： Password Length 10 digits Standby Current <50uA Power Supply One 9V Alkaline battery (recommend DuracellTM) Battery Life Span About 1 year Battery Low Voltage 5.4±0.2V Operating Humidity (Max.) 90% Time Delay 0 ~ 99 minutes

Specifications: ◆ Fingerprint Sensor: 500 DPI Optical Sensor ◆ Info Display: LED Display Screen ◆ Registration Capacity: 10 fingerprints + 10 passwords ◆ Password Length: 10 ~14 digits ◆ Verification Time: < 1 Second ◆ False Rejection Rate: < 0.1% ◆ False Acceptance Rate: < 0.0001% ◆ Standby Current: < 30µA ◆ Operating Humidity: 10% ～ 80% ◆ Operating Temperature: For Fingerprint Entry: +14℉ ～ +149℉ For Password Entry: -40℉ ～ +149℉ Features: ◆ Lock Override: Hidden key override ◆ Safe Controller: A solenoid lock meets UL Sub 2058 Security Level I requirement ◆ Unlocking: A finger touch or a password ◆ Power Supply: One (1) 9V alkaline battery (recommend Duracell® brand battery) ◆ Battery Life: About 2000 lock openings ◆ Safe Material: Carbon Steel ◆ Body Thickness: 1/16”(1.5mm) Door Thickness: 5/32”(4.0mm) ◆ Safe Color: Grey or Black or a customized color ◆ Dimension: 10-1/4”(H) x 14”(W) x 9-7/8”(D) 　260mm(H) x 355mm(W) x 250mm(D) ◆ Weight: 24.3 lbs. (11.0 Kgs)

GC-2006 Fingerprint Garage Door Controller is one of our newly developed biometric series products. This keyless entry system incorporated our patented fingerprint technologies and fine manufacturing craftsmanship to offer customers a high end device for home security applications. The system has everything required for most residential garage installations, including a fingerprint reader, a door controller, and a power supply. The fingerprint reader is designed for outdoor mounting and it provides users two simple and easy ways to open garage doors by either a touch of a fingerprint or a password. 1. OneTouchTM auto fingerprint verification . 2. Administrator controlled with easy adding or deleting other users. 3. LED display screen and back-lit keypads for easy access in the dark Sleek &durable design. 4. User friendly program for easy Installation and Operation. 5. Water-protection and sunlight resistant for outdoor use. SPECIFICATIONS: Fingerprint Sensor 500 DPI optical sensor Verification Time <1 sec Verification Type 1 to N Fingerprint capacity Up to 30 fingerprint templates + 30 Pin codes FAR (False Acceptance Rate) < 0.0001% FRR (False Rejection Rate) < 0.1% Password Length 6 - 14 digits Power Supply 120V/60Hz 5W AC Power Operating Temperature For fingerprint entry: -10℃～+65℃ (-14℉～+149℉) For password entry: - 40℃～+65℃ (-104℉～+149℉) Fingerprint Reader Dimension 6”X2-3/16”X1-11/16” Operating Humidity 10% ～ 80%

Horse-shoe rifle rack Info display: LED window Including internal reset and key bypass Five steel live-locking bolts Four adjustable shelves A 3-spoke type handle External hinges Hardened steel plate for protecting lock from drill attack Door back organization system (Optional) Carpeted interior A FP module featuring as: 1) Fingerprint Sensor: 500DPI Sealed Optical Sensor 2) Password Length (Optional): 10-14 digits 3) Infrared Standby Sensor Activity: 1/4 Sec every second 4) Operation: Single Touch (No Wake-Up Codes) 5) Response Time: < 1.0s 6) Fingerprint Registration Capacity: 30 Fingerprints 7) False Rejection Rate: <0.1% 8) False Acceptance Rate: <0.0001% 9) Operating Temperature: +14℉~+149℉(-10℃~+65℃) 10)Operating Humidity: 10%~80% 11)Power Supply: One Standard 9V Alkaline Batteries 12)Static Current: <30µA (Typical) Override Mechanism: Secure Hidden Key Override Materials: Body: 3mm Carton Steel Door：6mm Carton Steel Battery Life Span: About 1 Year Color: Black or customized color. Specifications: Fireproof Function Capacity of Rifles Dimensions Weight Physical Dimension W×D×H Carton Dimension W×D×H N.W. G.W.(/Pallet) Fireproof. 1200℉ (about 649℃) 30 minutes 14 Rifles 22-3/4”×24”×59” (580×610×1500mm) 28”×28-3/8”×65-1/8” (710×720×1655mm) 463lb. (210Kg) 507lb. (230Kg) 24 Rifles 28-3/8”×24-3/8”×59” (720×620×1500mm) 33-11/16”×29-5/16”×65-1/8” (855×745×1655mm) 507lb. (230Kg) 551lb. (250Kg)

Main features TalenCa 9102DG digital electronic lock is the new digital electronic lock with high security especially designed for the office buildings and high-level apartments. It adopts the high reliable microcomputer control system and the patent high security electronic lock designed by our company, so that it can avoid technical opening and provide efficient safety for you. TalenCa 9102DG series products have ten groups separate passwords (3000 groups at most after extension). Each group password can be controlled separately, such as startup/prohibiting, setting and changing password. Each password can be changed by the owner. The administrator can control any group password and manage any group password separately, such as startup/prohibiting or changing the password. Provide special recovering program. When all the passwords are lost or forgotten, the lock can be recovered to the factory state without affecting the lock’s security.

Main Features TD-2006-U100 Digital Electronic Lock is specially designed for apartments and small offices. The lock operates via passcodes. Unlike conventional digital electronic locks, it has management function which allows 99 passcodes for individual users. ◆ Patented Secure Deadbolt enables mechanical Locking/Unlocking from Inside and Outside. ◆ LED display for convenient info displays. ◆ Administration controlled by passcode with easy adding or deleting other individual users. ◆ User friendly program for easy installation and operation. ◆ Optional waterproof cover for outdoors. Registration Capacity 99 Passcodes (for TD-2006-U100) Passcode Length 4 ~ 10 digits Static Current 10μA Power Supply 4 AA alkaline (1.5V) or rechargeable (1.2V, 1800mA.h) batteries Battery Lifetime 2 ~ 3 years (30 lock operations per day)* Emergency Key Override 8-pin key cylinder Dimensions 7-9/16” × 2-27/32” Operating Temperature -40℉～+158℉（-40℃～70℃） Operating Humidity 10% ～ 80%

Material: Brass handle and brass cover. Outside handle can be turned while in locking state, in order to avoid destroy with force. Five-latch mortise with anti-theft latch preventing opening by plastic card. Finishes: 24K pearl gold, pearl nickel, stain brass, satin stainless steel, matt silver with polished rim, matt gold with polished rim, pearl gold and ect. Operating temperature: -10℃～+65℃ (-14℉～+149℉) Operating Humidity: 10%-80% Perfect key card classifying and grouping management function can meet the requirements of the hotel management. - The guest key card can open the allocated 1 to 18 guest rooms’ locks. - The attendant key card or maid card can open all the guest rooms’ locks on the appointed 1 to 8 floors. - The general card or the master card can open all the guest rooms’ locks in the hotel. - Based on the smart card’s high security, the key card can realize the consumption function and realize one smart card with multi-purpose, which provides great convenience to the guests. - 224 opening records can be saved. Each record has complete time and date label. And the card owner’s information and card issuer’s information are included. Alarm function. Long beep alarm sounds when the lock is not closed properly. Easy maintenance with low cost: Card socket is separated with CPU boards.

Modern European streamline style. The lock looks elegant. Patent structure. There is no exposed screws outside the lock, so the lock is safe, neat and good-looking. Five-latch mortise with anti-theft latch preventing opening by plastic card. Finishes: 24K pearl gold, pearl nickel, stain brass, satin stainless steel, matt silver with polished rim, matt gold with polished rim, pearl gold and ect. Operating temperature: -10℃～+65℃ (-14℉～+149℉) Operating Humidity: 10%-80% Perfect key card classifying and grouping management function can meet the requirements of the hotel management. - The guest key card can open the allocated 1 to 18 guest rooms’ locks. - The attendant key card or maid card can open all the guest rooms’ locks on the appointed 1 to 8 floors. - The general card or the master card can open all the guest rooms’ locks in the hotel. - Based on the smart card’s high security, the key card can realize the consumption function and realize one smart card with multi-purpose, which provides great convenience to the guests. - 224 opening records can be saved. Each record has complete time and date label. And the card owner’s information and card issuer’s information are included. Alarm function. Long beep alarm sounds when the lock is not closed properly. Easy maintenance with low cost: Card socket is separated with CPU boards.

France style. Outside handle can be turned while in locking state, in order to avoid destroy with force. Five-latch mortise with anti-theft latch preventing opening by plastic card. Finishes: 24K pearl gold, pearl nickel, stain brass, satin stainless steel, matt silver with polished rim, matt gold with polished rim, pearl gold and ect. Operating Humidity: 10%-80% Perfect key card classifying and grouping management function can meet the requirements of the hotel management. - The guest key card can open the allocated 1 to 18 guest rooms’ locks. - The attendant key card or maid card can open all the guest rooms’ locks on the appointed 1 to 8 floors. - The general card or the master card can open all the guest rooms’ locks in the hotel. - Based on the smart card’s high security, the key card can realize the consumption function and realize one smart card with multi-purpose, which provides great convenience to the guests. - 224 opening records can be saved. Each record has complete time and date label. And the card owner’s information and card issuer’s information are included. Alarm function. Long beep alarm sounds when the lock is not closed properly. Easy maintenance with low cost. Card socket is separated with CPU boards. Operating temperature: -10℃～+65℃ (-14℉～+149℉)

Perfect key card classifying and grouping management function can meet the requirements of the hotel management. - The guest key card can open the allocated 1 to 18 guest rooms’ locks. - The attendant key card or maid card can open all the guest rooms’ locks on the appointed 1 to 8 floors. - The general card or the master card can open all the guest rooms’ locks in the hotel. - It can manage up to 32 different functions on the card-lock for the hotel usage. It has the two levels password system, which is suitable for the concatenate hotels. - The first level password is mutual for all the concatenate hotels. - The second level password is private for each branch hotel. So it can make sure the common information’s exchange and make sure the private information’s security in each branch hotel. Based on the smart card’s high security, the key card can realize the consumption function and realize one smart card with multi-purpose, which provides great convenience to the guests. 224 opening records can be saved. Each record has complete time and date label.And the card owner’s information and card issuer’s information are included. It adopts the patented technology of TEMIC® from Germany. It has advanced high performance and dependability. It adopts advanced contactless (wireless radio frequency) smart card and there is no groove on the surface of the lock. When the card is in the distance of 1-3 cm, the lock will be opened. 32 digits highly secure safekeeping password guarantees the high security of the lock system. The key card management system of 32-level random grouping, each card can manage 3-6 groups of locks simultaneously. The patented induction test technology of Easthouse Electrical realizes the super low power consumption for the lock. When the lock is in the stand by position, the power consumption is less than 20mA. Four alkaline batteries of size AA can work for more than one year. Operating temperature: -10℃～+50℃ (-14℉～+122℉) Operating Humidity: 10%-80% The industry-level clock module. The independent lithium battery provides stable and accurate interior time standard for the locks. It can realize the function of multi-purpose smart card and provide necessary software interfaces and the equipment of hardware card reader.

With modern European streamline style, the lock looks elegant. With the patent structure, there is no exposed screws outside the lock, so the lock is safe, neat and good-looking. Perfect key card classifying and grouping management function can meet the requirements of the hotel management. - The guest key card can open the allocated 1 to 18 guest rooms’ locks. - The attendant key card or maid card can open all the guest rooms’ locks on the appointed 1 to 8 floors. - The general card or the master card can open all the guest rooms’ locks in the hotel. - It can manage up to 32 different functions on the card-lock for the hotel usage. It has the two levels password system, which is suitable for the concatenate hotels. - The first level password is mutual for all the concatenate hotels. - The second level password is private for each branch hotel. So it can make sure the common information’s exchange and make sure the private information’s security in each branch hotel. Based on the smart card’s high security, the key card can realize the consumption function and realize one smart card with multi-purpose, which provides great convenience to the guests. 224 opening records can be saved. Each record has complete time and date label.And the card owner’s information and card issuer’s information are included. It adopts the patented technology of TEMIC® from Germany. It has advanced high performance and dependability. It adopts advanced contactless (wireless radio frequency) smart card and there is no groove on the surface of the lock. When the card is in the distance of 1-3 cm, the lock will be opened. 32 digits highly secure safekeeping password guarantees the high security of the lock system. The key card management system of 32-level random grouping, each card can manage 3-6 groups of locks simultaneously. The patented induction test technology of Easthouse Electrical realizes the super low power consumption for the lock. When the lock is in the stand by position, the power consumption is less than 20mA. Four alkaline batteries of size AA can work for more than one year. Operating temperature: -10℃～+50℃ (-14℉～+122℉) Operating Humidity: 10%-80% The industry-level clock module. The independent lithium battery provides stable and accurate interior time standard for the locks. It can realize the function of multi-purpose smart card and provide necessary software interfaces and the equipment of hardware card reader.

It adopts advanced contactless (wireless radio frequency) smart card and there is no groove on the surface of the lock. It is more secure and convenient than the common contact smart card lock and the magnetic card lock. It adopts the patented technology of MIFARE® from Philips Company in Holland. It has advanced high performance and dependability. The patented induction test technology of Easthouse Electrical realizes the super low power consumption for the lock. When the lock is in the stand by status, the power consumption is less than 20mA. Four Alkaline batteries of size AA can work for more than one year. Operating temperature: -10℃～+50℃ (-14℉～+122℉) Operating Humidity: 10%-80% The key card management system of 32-level random grouping, each card can manage 16 groups of locks simultaneously. The industry-level clock module. The independent lithium battery provides stable and accurate interior time standard for the locks. It can define a group of time periods. (Independent time schedule of each week. The card can’t open the lock after work or in holidays.) The open-type international standard smart card reserves 14 independent storage regions. Each region has its independent access password. The card can also be simultaneously applied in 14 different occasions at most besides the door, which reserves enough space for the application of multi-purpose smart card. 2800XG3800XG

The standard ET-BUS interface can be directly interlinked with TalenCa multi-purpose smart card system. The real-time accrediting or canceling any user’s card can be operated through the network. The power is supplied by the external altering current and the standby Ni-H battery pack in the lock so that it can continue working for 1 or 2 days after the external power is off. It has all the functions of the corresponding non-interlinkedMifare card lock.

Product Description » *Support Simens 4442 smart card *Input voltage: 220V AC+/-20%, 110V AC+/-20% *size: 86.0x86.0x50.0mm *30 seconds time delay *Power consumption: <2W *LED light

Support TEMIC 5550/5551 and Mifare One contactless smart card. Input voltage: 220VAC +/-20%, 110VAC +/-20%, 12DC/AC +/-10%. Power consumption: <2W. Power-off time delay. It will automatically shut off the power after 30 seconds when the card is taken out. Output control power: max 15A/220VAC/110AC or 30A/220VAC/110AC.

Type and Specifications Support TEMIC 5550/5551 and Mifare One contactless smart card. Input voltage: 220VAC +/-20%, 110VAC +/-20%, 12DC/AC +/-10%. Power consumption: <2W. Power-off time delay. It will automatically shut off the power after 30 seconds when the card is taken out. Output control power: max 15A/220VAC/110AC or 30A/220VAC/110AC. Main Features of the Product Special smart card will control the power consumption. Only VIP cards, attendants' cards and other cards permitted by the hotel can get power through the power-saving switch. The real-time room state can be seen on the master computer or any authorized interlinked computer. When the guest is not in the room, the attendant can go into the room to do some cleaning. Sometimes, the light of "don't disturb" is on and the attendant will think that the guest is in the room. In fact, the guest is not in the room. When the guest comes back, he or she will find the room hasn't been cleaned, which will lead to customer's complaints. This function will avoid such condition happening. The special room-state displaying screen can display the state of the room. When the attendant finishes cleaning the room, the displaying screen will display OK. As a result, the guest rooms can be managed efficiently. It can control the power of the guest rooms remotely by computer (turn on or off the power supply). If it is interlinked with safekeeping boxes, the safekeeping boxes in the rooms can also be monitored. If the guest is not in the room and the safekeeping box is open, something abnormal may have happened. It can be used together with TA-21N series interlinked intelligent air-conditioner controller produced by our company.

4-digit LED screen and 12-button standard keyboard. Motor-driven lockpin mechanism, with high reliability. 1 to 8 digits passwords, which can be randomly set by the user itself. 2 Administrator Passwords (1 to 8 digits), which can be set by administrators and should be kept by two administrators respectively for security reason. In case, user forget password, the safe can be open only by two administrator passwords, input by two administrators respectively with in specified time. Unique Super User’s Password, for emergency use with high-security. Audit Trail function. Latest 128 operation records can be saved, for use in case of robbery happened. An optional clock system. Unlocking time can be added to records, to ensure higher safety. An optional attached controller, for emergency unlocking use. Power supply: 4 AA-size alkaline batteries. The safe can operate more than 5000 times. TECHNICAL SPECIFICATIONS Power Supply: 6V DC (4 AA-Size Alkaline Batteries) Power Consumption: Standby Current: Less than 5mA. Battery Life Span: about 2 years for operating 5,000 times. User’s Password Combination: More than 200 million combinations. Administrator’s Password Combinations: More than 200 million combinations. Dimensions: Model JB-25B: 355(W) x 260(H) x 250(D) mm Model JB-27B: 400(W) x 220(H) x 270(D) mm Model JB-510B: 510(W) x 220(H) x 400(D) mm Thickness of the Safe Body: Door Steel Thickness: 6 mm (outer plate) plus 2 mm (inner lining plate) Wall Steel Thickness: 4 mm

Main Features of the Product TA-21N series intelligent air-conditioner controller is the new network intelligent power-saving product produced only by our company. It is applied in the rooms of hotels and is connected with the intelligent power-saving switch. If there are no people in the room, the air-conditioner will automatically work in the condition of power saving. When the guest comes back into the room, the air-conditioner will automatically adjust the temperature to the former degree set by the guest. Through ET-BUS network system, managers can know the working states of the air-conditioner in each room on the remote computer, including the set temperature, actual temperature in the room and wind speed etc. If necessary, the working states of the air-conditioner can also be set through the remote computer system. For example, it will automatically adjust the temperature to the comfortable degree for the new guests and to the favorite degree for the old guests according to the former records, and the air-conditioner in the rooms which need maintenance will stop working. The hotel can decide the spare rooms according to the estimated rate of room service in different period of time so that the computer system can automatically keep the air-conditioners in some spare rooms working so as to economize the cost for air-conditioners’ work. The smart card lock management software of our company can directly control and display the working state of the air-conditioner, so can the third-party software system through the open interface. In general intelligent buildings, intelligent air-conditioner controller can also be used to monitor and manage the air-conditioning system concentratedly. Type and Specifications Input voltage: 220VAC +/-20%, 110VAC +/-20%, 12DC/AC +/-10%. Power consumption: <3W. Fan control: three levels of high, medium and low speed, and automatic wind rate control, max control power 400W. Electromagnetic valve control: mono-tube or double-tube output control, max control power 400W. Output control power: max 15A/220VAC/110AC or 30A/220VAC/110AC.

TalenCa 9700NX Contactless Smart Card Access Control Management System n *Main Features of the System .KX-800/880 series contactless smart card attendance checker adopts LCD to display year, month, date and time, and the card number of the personnel when reading the card. .It has the keyboard, with which common functions of simplemanagement and inquiry can be realized. .If the power is shut off, the record can be kept for over 10 years. .The power for the clock in the attendance checker is supplied by the independent special lithium battery. If the electrical power is shut off, the clock will continue working for more than 10 years so that the time needn’t resetting. .Several fixed time of starting or ending work, off-day of the week and holidays can be set randomly according to the conditions of the departments or groups. .Situation of absence from duty can be input manually so that different conditions such as sick leave, private affair leave, business trip and work done outside the office etc. can be accurately recorded. .The situation of going out during working time can be input manually so that the hours or days of sick leave or private affair leave can be recorded. .Overtime work can be automatically saved according to the card-reading record. The time (number of hour) of any event can be modified to avoid false overtime work record. .It can list the specific attendance record of any person at any appointed time. The table will list his or her records of starting work, leaving, work number, being late, leaving early, private affair leave, sick leave, business trip and overtime work etc., and report forms can also be printed out. .It can list the attendance check report of any department at any appointed time. The table will list the times of being late, leaving early, the total of sick leave, private affair leave and overtime work (number of hour), due work days and real attendance days of any person in the department, and report forms can also be printed out. .The communication distance between the attendance checker with RS-232C interface and the computer without repeaters should be no more than 30m. One more repeater allows more distance of 1,200m. .The communication distance between the attendance checker with ET-BUS interface and the computer without repeaters should be no more than 1,200m. One more repeater allows more distance of 1,200m. .The distance of reading card is 3~8cm. The reading time is less than 0.5 second.

TalenCa TE-16A Contactless Smart Card Lift Controller Main Features Features TE-16A lift controller adopts contactless smart card lift controller with the technology from Germany. It can share the same card with TalenCa contactless smart card computer-controlled locks and the access control and the attendance check system. The standard positioning can control 16 independent stories(It also can be expanded to 256 independent stories at most.). 256 user groups can be set for 1,500 users (30,000 users at most after expansion). The function of time limit. The card can only be used in the stated period of validity.The function of weekday time limit. The card can only be used in the stated period of validity of valid weekday. At most, 40 time periods can be set, including 30 normal weekday periods, 8 holiday periods and 2 temporarytime periods. One or more time periods can be set for each user group. The card for the user group will only be valid in the appointed time period. One or more time periods can be set to be free for each story. (The lift story will be open at fixed time without card.) 5,000 using records, including card number and time of using. High accurate clock inside, annual error is less than 15 minutes. The lithium battery can work for more than 10 years without the power. The right of use of any lost card can be limited and other valid cards can be still normally used. It has RS-485 interface and can be interlinked with computer. It can independently work without being interlinked. Data can be input by handy programmer. Clock adjustment and record drawing can also be realized in this way. Perfect anti-jamming measures can ensure the stability and dependability of the system’s operation. Industrial level system. It can work in the environment of -25°C---50°C and relative humidity 85% (25°C). The withstand voltage of interface amounts to 400V.220V AC.The installation and the use are convenient. The contactless smart card reader can be installed inside or outside. (The inside installation should be specially made according to the condition of the lift.) The function of failure isolation. When the lift controller doesn’t work normally or the power is off, all buttons will be automatically turned on. Fire protection interface. When the lift controller receives the alarm from the fire system, all buttons will be automatically turned on. Main Technical Indicators n Technical Indicators The number of lifts that can be controlled: 16 for standard positioning, 256 at most. The largest number of users: 1500 users (30,000 users at most after expansion). Each lift controller can be equipped 4 card readers at most, which is convenient for the large-scale lift. Types of contactless smart cards. Different card readers can support TEMICE5550/E5551/EM4001 or Mifare One/Mifare Pro/Mirafe light respectively. Reading distance of the contactless smart card: >3cm. The output type of the control interface: two wire system optical isolation AC noncontact electronic switch (dry contact). The withstand voltage of the control interface: 400Vp----p (continuous voltage). The permitted largest continuous electrical current of control interface: 100mA. The output electrical resistance of control interface: <100 ohm. The isolated withstand voltage of control interface: 1,500VAC (90 seconds). The standard of communication interface: ANSI Standard RS-485. The largest communication distance without repeaters: 1,200m (with STP twisted pair line). Power voltage: 185VAC----265 VAC. The largest consumption of power supply: 10W. Working environment: temperature -25°C----50°C, relative humidity 85% (25°C). Temperature for storage: -25°C----70°C.

System Profile With contactless smart card and computer management as the core, the system is formed by the high dependable road-gate and the parking lot control equipment invented and produced by our company. The system is stable and dependable and can be easily operated, which can realizes the comprehensive management of vehicles’ entering and going out, charging and security etc. System Constitution and Main Function The basic facitities installed on the driveway of the gate of parking lot include the integrated machine of the contactless smart card gate card reading display and the electric gate control, electric gate with the vehicle sensor, color camera of gate, control box, extended interphone, computer-controlled manual/automatic toll system and parking toll management software etc. Uses can enter or go out of the parking lot by reading card. If necessary, the toll will be received by computer system automatically or manually. The main equipments in parking the toll supervisory center include system server, card issuing and system management and toll computer, computer for supervision of parking lot equipment and temporary parking toll, desk card reader and writer and host interphone etc. The main function is to monitor and control the vehicles and the work of equipments on the driveway, finish setting all kinds of parameters of toll management system, issue and collect parking cards, collect data and print out relevant report forms and give alarms. Main Features of the System The integrated machine of the contactless smart card gate card reading display and the electric gate control has the perfect function of gate control. Extended interphone (optional), SOS button and VFD (plasma) Chinese character displaying screen. The distance of card reading is 10cm (standard). The long-distance products such as 50cm and 100cm are optional. Teleoperator is optional for the managers to operate the opening and closing of the gate. The control system with standard C/S structure adopts the standard ET-BUS protocol of our company and can be connected with TalenCa multi-purpose smart card management system seamlessly. It has the function of remote control. It can directly operate the gate on the remote management terminal computer system. It adopts imported famous electric road gate from KABA in Germany and NORVA in Singapore, vehicle sensor, overloading protection and the equipment that protect the system from being broken. The gate has two types: straight pole and folding pole (suitable for the underground parking lots of low height). It is dependable and has reasonable structure and long working life. If the power is off suddenly, the gate pole can be operated manually (KABA gate from Germany). The terminal position of the gate pole is protected electrically and mechanically. It has the function of fire protection linkage and automatic pole rising when power is off (small UPS needed). The surface of the gate box is painted lasting outdoor molding powder. All parts in the box are antirust so that they meet the needs of the outdoor environment at any time. The 400-line color camera of low light level can be installed on the gate together with a waterproof cover. It has the function of photographing monitoring linkage. When the vehicle enters the gate and the card is read, the camera will begin to work to record the information of the vehicle such as its figure, color and license plate etc. and save the information into the database of the image processing computer according to relevant card number so that when the vehicle goes out of the parking lot, the information will be called out. When the vehicle goes out of the parking lot, the card will be read and the camera will begin to work to record the information of vehicle such as its figure, color and license plate etc. and compare them with the image photographed when it entered according to the card number for automatic or manual confirmation. It adopts industrial control computer to be in charge of monitoring all the equipment in the parking lot and the toll of temporary card parking. It communicates with all kinds of sensors, controllers, card readers and writers and the toll displaying screen at real time. It is also in charge of collecting the data of parking lot and checking parking cards. The video signal from the camera at gate will be digitized and saved in the system server so as to check the vehicles and finish comparing the images of vehicle in and out. The intercommunication system is installed in the card reader at the gate. Personnel will guide the car owner to use the equipment, which is convenient for users’ inquires and solving sudden problems. The printer is connected with the card issuer and the system management computer so that the information of the operation of the parking lot and the toll can be printed out at any time, for example, the journal account of vehicles in and out every day, the numbers of licence plate of all vehicles the day before and the volume of vehicle flow, which can be easily inquired about and counted by the management department. The system can collect smart card information through card issuers and toll card readers or read and write the cards so as to complete the issuing and management of monthly cards and fixed cards.

Biometric Series Controllers are our newly developed biometric series products. Incorporated with our patented fingerprint technologies, the Biometric Controller offers customers a high end system for safes applications. It features our unique Self-Learning software function, single 9 Volt battery saving operation, programmable Time Delay, Security Level 2 fingerprint plus password unlock and 30 fingerprints user capacity. FPC-0601 series Biometric Entry Pad is designed for convenient sliding mounting with three simple and easy ways unlocking by a finger touch, a password or a fingerprint plus a password. Combined with our UL approved and patented heavy duty EL-0601 Electronic Swingbolt, it provides a complete control system to safeguard your safes. ◆ Patented OneTouchTM auto fingerprint verification ◆ Unique Self-Learning function ensuring easy operation with much reduced FRR ◆ Battery saving design with one 9V battery operation and low battery alert ◆ UL approved and patented heavy duty EL-0601 Electronic Swingbolt ◆ Administrator control with individual user enrollment and deletion ◆ Programmable 0 ~ 99 minutes Time Delay ◆ Wrong password entry lock out penalty Biometric Entry Pad: EL-0601 ElectronicActuatorEL-0603 Electronic Solenoid Specifications： Registration Capacity 30 fingerprints + 30 passwords Password Length 10 ~ 14 digits Verification Time < 1 second False Rejection Rate (FRR) < 0.1% False Acceptance Rate (FAR) < 0.0001% Standby Current <50uA Power Supply One 9V Alkaline battery (recommend DuracellTM) Battery Life Span About 1 year Battery Low Voltage 5.4±0.2V Operating Temperature For fingerprint entry: +14°F ~ +149°F / -10°C ~ +65°C For password entry: -40°F ~ +149°F / -40°C ~ +65°C Operating Humidity (Max.) 90% Time Delay 0 ~ 99 minutes

Biometric Controller(BSL-0608) BSL-0608 series are our newly developed fingerprint products with high performance-cost ratio. Incorporated with swiping fingerprint sensor, this series of controllers feature the battery saving design with one 9v battery operation. FPC-0608 series of Fingerprint Entry Pads are designed for convenient sliding mounting with two simple and easy ways of unlocking by a finger swipe or a code and easy operations with audio-video signals. Combined with our patented heavy duty EL-0601 Electronic Actuator or EL-0603 Electronic Solenoid, it provides a complete control system to safeguard your safes. Polished Brass Brushed Chrome Features: 1. 10 Fingerprints & 3 codes capacity 2. Semiconductor swipe fingerprint verification 3. Administrator’s control on enrollment and deletion 4. Fast verification within 2 seconds of swiping a finger 5. No fingerprint remnant stain to ensure stable performance and easy operation 6. Battery saving design with one 9V battery operation and low battery alert 7. Patented and UL listed heavy duty EL-0601 Electronic Actuator 8. Long life span with 10,000,000 operations 9. Audio-video signals EL-0601 SPECIFICATIONS: Registration Capacity 10 fingerprints+3 codes Verification Time 0.2 seconds False Rejection Rate (FRR) < 0.1% False Acceptance Rate (FAR) < 0.0001% Standby Current < 30 uA Power Supply One 9V alkaline battery* Battery Life Span 2000~3000 operations Battery Low Voltage 6.0±2V Operating Temperature -20 °C ~ +70°C Operating Humidity 10% ~ 80% *Due to the difference in battery capacity, the biometric controller is tested based on 850mA.h battery capacity.

Wireless Network Biometric Controller (BSL-0601A-W) Wirelessnetwork biometric controller series is one of the company’s most advanced products incorporated with patented fingerprint high technologies.It features user-friendly operation prompt, correction prompt for inaccurate operations and maintenance guide information in virtue of applying 124×64 lattice high definition LCD display. These features help users to easily operate and maintain the system while saving time on reading instructions. Wireless network biometric controller series satisfies common commercial users with basic model features. It also provides the world pioneering technology of wireless records transferring and wireless networking for high-end users. The company’s strict manufacturing workmanship and process management ensure high quality control and maximize the capacity. A long life design of 500,000 operations makes the product more cost competitive. The unique procedure of conducting a two-thousand-time heavy duty aging test on each single unit is the company’s promise to insure product reliability. FPC-0601A-W Entry pad EL-0601 Electronic Actuator Wireless Access Point &Wireless USB Adaptor Wirless Station Management System Features: 1- Up to 20m (65’) effective communication distance between Wireless Access Point (Wireless Net Bridge) and Biometric EntryPad. 2- Monitoring and recording all operations on Biometric Entry Pads in real-time. 3- Patented One Touchauto fingerprint verification. 4- Self-learning software function. 5- Battery saving design with a 9V battery operation and low voltage powersupply alert. 6- Administrators control individual user enrollment and deletion. 7- Programmable 0~99 minutes Time Delay and 0~15 minutes Time Window. 8- Audit trail reporting up to 1,023 records on LCD info display. 9- Time lock allowing users greater flexibilities on control. 10-Dual mode providing accountability with two individual user entries. Specifications： Registration Capacity 30 fingerprints + 30 passwords Password Length 10 digits Verification Time < 1 second False Rejection Rate (FRR) < 0.1% False Acceptance Rate (FAR) < 0.0001% Standby Current <50uA Power Supply One 9V Alkaline battery (recommend DuracellTM) Battery Life Span About 1 year Battery Low Voltage 5.4±0.2V Operating Temperature For fingerprint entry: +14°F ~ +149°F / -10°C ~ +65°C For password entry: -40°F ~ +149°F / -40°C ~ +65°C Operating Humidity (Max.) 90% Time Delay 0 ~ 99 minutes

Electronic Combination Controller Series are newly developed electronic series products. Combined with our UL approved and patented heavy duty EL-0601 Electronic Actuator, the Controller provides a complete lock system to safeguard your safes. Digital Entry Pad is designed for convenient sliding mounting in an easy way of unlocking by passwords. MODEL：ECSL-0601A-P01 Polished Brass Brushed chorme FEATURES: ECSL-0601A Basic Series ◆ UL listed assurance ◆ Plastic entrypad ◆ Low Cost ◆ Manager plus two user codes ◆ Wrong entries penalty ◆ Audio signals ◆ Standby status ◆ One 9V alkaline battery power supply ◆ Low battery alert Options: ◆ One super code lock reset ◆ Single and Dual User modes ◆ Programmable Time Delay and Time Window Electronic Actuator Specifications： Power Supply One 9V Alkaline battery (Recommend DuracellTM) Power Supply Range DC 4.5V ~ 12V Password Length 6 digits Standby Current <15uA Active Current <20mA Battery Low Voltage 5.2±0.2V Operating Humidity (Max.) 90% Time Delay 0 ~ 44 minutes (ECSL-0601A) Time Window 0 ~ 20 minutes (ECSL-0601A)